 首頁 \ 關于遠東
|
| 首頁 關于遠東 產品目錄 銷售網絡 生產設備 技術支持 公司資質 聯系我們
 夾套保溫泵適宜輸送輸送高粘度樹脂,聚氨酯,聚醚等介質泵
|
| 
|
|
|
選擇夾套保溫泵的理由Reasons for choosing jacketed heat pump
1．密封維修，更換，升級方便：軸承腔加大，軸承部分成為一個整體的部件，只需擰下頂絲即可旋下整個密封腔。密封可以從支架的軸承箱部分直接取下。這樣不僅大大節省了維修的時間，更使維修變得更容易。
Seal repair, replacement, convenient upgrade: the bearing chamber, the bearing
parts as a whole, simply
unscrewing the top wire can unscrew the whole seal chamber.Seal can be removed
directly from bearing box part of the stent.This not only greatly saved maintenance
time, more make maintenance easier.
2．齒輪尾部間隙可調：NYP高粘度泵可以根據粘度的需要，通過調節齒輪間隙，達到泵在不同黏度下的工藝要求。整體軸承箱第二大優勢就是，只需轉動軸承箱即可實現間隙的調整。操作簡單，不需拆卸泵的任何部件。Adjustable
gear tail: NYP can need according to the viscosity, high viscosity pump by
adjusting the gear clearance, to pump under different viscosity process requirement.Whole
bearing box's second biggest advantage is, need to turn the bearing box clearance
adjustment can be realized.The operation is simple, do not need to remove any
parts of the pump.
3．加大軸承腔第三大優勢:：寬大的支架腔提供的空間，不需拆泵，即可對填料進行調節。Increase the bearing chamber, the
third largest advantage: wide scaffold cavity space, do not need to dismantle
the pump, the packing can be regulated.
4．部分重要部件可以根據工藝需要更換為各種耐高溫、耐磨損、耐腐蝕、耐高壓，和自潤滑的材質。Some important parts can be according
to process needs to be replaced for all kinds of high temperature resistance,
wear resistance, corrosion resistance, resistance to high pressure, and self-ubricating
material.
5．整塊材料堅固的鑄造，避免了因振動、強外力等緣故造成對密封、軸承的影響。保證了泵輸送的穩定性。The whole block material solid
casting, to avoid the caused by vibration, strong external forces such as
sake of sealing, the influence of the bearing.Ensure the stability of the pump.
6．大流量泵可以實現高壓下工作。 Big flow pump can work under high pressure.
7．強有力的加粗軸保證了泵輸送的穩定性。Strong bold shaft to ensure the stability of the pump
8．保溫夾套整體鑄造，保溫效果好，零泄漏。Heat preservation jacket whole casting, heat preservation
effect is good, zero leakage.
9．多種耐高溫填料密封，特殊材質、特殊設計，創造了填料密封勝過機械密封的奇跡。A variety of high temperature resistant
packing seal, special materials, special design, created the miracle of packing
seal is better than a mechanical seal.
夾套保溫泵的結構特點:The structure of the jacketed heat pump
features:
夾套保溫泵用于輸送高粘度樹脂,聚氨酯,聚謎,聚乙烯等類似的高粘度物料，夾套保溫泵是根據石油、化工、涂料、油脂、醫藥、染料、食品等行業的需求，研制開發的新型容積式泵，由于該產品可選用不同的材質和其獨特的結構，夾套保溫泵、保溫泵廣泛應用于不同性質，不同粘度的介質輸送。
適用介質溫度：-10℃ —200℃。適用介質粘度：1.0cSt—300,000cSt。 Jacketed
heat pump used to transport high viscosity resin, polyurethane, polyethylene
mystery, polyethylene and other similar high viscosity material, jacketed heat
pump is according to the petroleum, chemical industry, paint, oil, medicine,
dyes, food and other industries demand, research and development of a new type
of positive displacement pump, because the product can choose different material
and its
independence, the structure of the jacketed heat pump, heat pump
is widely used in different nature, different viscosity of medium transmission.Applicable
medium temperature: - 10 ℃, 200 ℃.Applicable medium viscosity: 1.0 cSt - 300000
cSt.
優點（1）輸送液體平穩，無脈動，振動小，噪音低。 （2）有很強的自吸性能。 （3）正確選用零件材料，可輸送多種有腐蝕性的介質，使用溫度可200℃。
（4）內外轉子Advantages: (1) smooth conveying liquid, no pulsation, little vibration,
low noise.(2) has a strong self-priming performance.(3) the
correct selection
of component materials, can transport a variety of corrosive medium, using
temperature is 200 ℃.(4) inner and outer rotor
用途:USES:別適用高粘度稠度介質的輸送。泵頭部、泵殼體、密封腔部分均可以帶保溫夾套。根據實際需要選擇需要保溫的位置。夾套與泵體鑄造成一體，保溫效果良好，能夠避免焊接夾套產生的各種問題。需加熱時：通過熱蒸氣、導熱油等各種熱媒通入夾套腔即可進行保溫。需冷卻時：通過各種冷卻液，可以保持泵體的恒溫。Especially
forhigh viscosity medium consistency of delivery.The pump head, pump shell,
seal chamber parts can with insulation jacket.According to the actual need
choose the location of the heat reservation.Jacket and pump body casting
into an organic whole, heat preservation effect is good, can avoid weldingall
kinds of problems.: when heating by hot steam, heat conduction oil and other
heat medium access jacketed cavity insulation can be achieved.When need cooling:
through a variety of cooling fluid, pump body can maintain a constant temperature.
廣泛應用于各種流體的輸送行業，尤其對于處理粘度變化較大、范圍較寬的流體輸送。 應用行業：適用于輸送純凈且有一定粘度的流體，可用于輸送油品如潤滑油、原油等；也可以用來輸送橡膠、瀝青、油漆、粘合劑、染料、涂料、潤滑劑、多元醇、食品、藥品等不含顆粒性雜質的高粘度物料；還可用于輸送PA
PB PC PE PS HIPS ABS PP PET PVA等高溫、高粘度聚合物熔體物料。
夾套保溫泵的結構特點如下 : The structure of the jacketed heat pump features below:
夾套保溫泵體分為普通與不銹鋼兩種材質，均帶有保溫套，適用于常溫下有凝固性或結晶而通過加溫并保持一定溫度又容易流動且有潤滑性的液體，以及高寒地區室外安裝和工藝過程中需要保溫的場合。Jacketed
heat pump body is divided into ordinary and two kinds of stainless steel
material, with thermal insulation
cover, under applicable interesting
coagulability or crystallization by heating and maintain a certain temperature
and lubricity and easy flow of liquid, need in the process of the high altitude
and outdoor installation process and heat preservation. 該夾套保溫泵的泵體設有空心夾層，并設有進出口法蘭，可用于導熱油、蒸氣、熱水、冷水等媒體對輸送的液體和泵進行保溫、加熱及冷卻。瀝青保溫泵開始工作時首先預熱降低了泵的起動功率。適用于輸送有腐蝕性或無腐蝕性、衛生條件要求較高的液體，輸送介質不含固體顆粒，溫度不高于
350 ℃ ，粘度為 5cSt——1500cSt 的液體，如各種化工原料、灌裝醫藥、食品、化妝品、農藥、洗滌劑、印染、釀造、樹脂、膠類等行業。該泵傳動方式有電機直聯和減速機兩種，當液體粘度超過
1500cSt 時，應采用減速機傳動。The jacketed heat pump pump body has a hollow nterlayer,
with import and export of flange, can be used in the thermal oil, steam,
hot water, cold water and other media to the transportation of liquid and
pump for heat preservation, heating and cooling.Asphalt heat pump starts
to work first preheating reduces the starting power of the pump.Applicable
to transport corrosive or non-corrosive, health conditions to demand higher
liquid, medium not containing solid
particles, the temperature is not
higher than 350 ℃, the viscosity of liquid for 5 CST - 1500 CST, such as
filling a variety of chemical raw materials, pharmaceutical, food, cosmetics,
pesticide, detergent, printing and dyeing, brewing, resin, rubber and other
industries.The pump drive way
has two kinds of motor and deceleration machine, when more than 1500 CST
liquid viscosity reducer drive should be adopted.
| 合成原油渣泵 |
SNH660R51U12.1W2三螺桿泵 |
浙江海正集團有限公司 |
| 輸送橄欖油泵 |
SNH80R36U12.1W21三螺桿泵 |
江蘇新海石化有限公司 |
| 污油輸送泵 |
NYP200B-RU-T1-J-W11高粘度泵 |
淮濱縣江淮船業有限公司 |
| 輸送樹脂泵 |
RCB10夾套保溫泵 |
廣東南方堿業股份有限公司 |
| 輸送變壓器油泵 |
SNH940R42U12.1W21三螺桿泵 |
江蘇飛翔化工股份有限公司 |
| 輸送石蠟泵 |
SNH940R46E6.7W21三螺桿泵 |
江蘇蘇化集團有限公司 |
| 輸送廢油泵 |
SNS210R46U12.1W2泵頭 |
江蘇申久化纖有限公司 |
| 稀釋瀝青裝船泵 |
SNS40R54U12.1W2三螺桿泵頭帶支架 |
四川省開元集團有限公司 |
| 輸送瀝青泵 |
SPF20R38G10W2三螺桿泵船用 |
瑞星集團有限公司 |
| 輸送瀝青泵 |
RCB8夾套保溫泵 |
江蘇申久化纖有限公司 |
| 輸送重油泵 |
SMH80R46E6.7W23三螺桿泵 |
山東大魚島造船有限公司 |
| 點火供油泵 |
SMH120R42E6.7W23三螺桿泵 |
榮成市尋山興海造船有限責任公司 |
| 鋼鐵廠稀油站液壓油泵 |
KCB-300齒輪泵 |
浙江天時造船有限公司 |
| 重油輸送泵 |
KCB-300齒輪泵 |
南通明德重工有限公司 |
| 輸送橄欖油泵 |
SNH440R52U12.1W21三螺桿泵 |
寧波新樂造船有限公司 |
| 輸送聚醚泵 |
RCB15夾套保溫泵 |
中船桂江造船有限公司 |
| 燃料油裝船泵 |
SNH940R46E6.7Y-W29三螺桿泵 |
南京武家嘴船舶制造有限公司 |
| 輸送糖蜜泵 |
SNH120R46E6.7YW21三螺桿泵泵 |
揚州龍川船業有限公司 |
| 輸送原油泵 |
SNGF80R46G10W21三螺桿泵泵 |
內蒙古慶華集團有限公司 |
| 輸送聚氨酯泵 |
RCB12夾套保溫泵 |
上海華誼丙烯酸有限公司 |
| 粘膠劑輸送泵 |
NYP-110-RU-T2-W51高粘度泵 |
深圳市南林化工有限公司 |
|
